...Laser-compact Group specializes in research, development and manufacturing of ultra-violet (UV), green and infrared (IR)
diode-pumped solid-state (DPSS) lasers....
ISO 9001:2008 certified

TECH-527 Basic - 2 - wavelength laser (527 & 1053 nm)

Application fields: various types of spectroscopy (including LIBS), laser microscopy, hi-tech R&D, laser-induced fluorescence, light detection, non-contact inspection, photoacoustics, semiconductor processing.

Features:
IR and green laser light from one source
Simultaneous pulses at 1053 nm and 527 nm in one beam with the same direction
Active Q-switched mode of operation with nanosecond pulse duration
High pulse energy and peak power
Perfect beam quality
Ultra-compact design
Conductive cooling of laser head
External / internal triggering, PC control via RS-232  

 

 

 

 

 

Parameter / Model TECH-527 Basic - 2 wavelengths
Wavelength, nm 527 1053
Mode of Operation Q-switched with AOM, ext./int. triggering/through RS-232
Emission Mode Two wavelengths simultaneously

Pulse Repetition Rate, kHz:

                        external triggering

                        internal triggering

 

Single pulse to 10

0.01 - 10

Pulse Energy @ 1 kHz, s 200 s 200
Average Output Power, mW s 400 @ 5 kHz s 800 @ 10 kHz

Pulse Width, ns:

                                @ 1 kHz

                                @ 4 kHz

                                @ 10 kHz

 

d 6

d 12

d 17

 

d 8

d 15

d 25

Peak Power @ 1 kHz, kW s 30 s 20
Beam Mode TEMoo
Beam Diameter (x, at output aperture), mm z 0.7 z 1
Beam Divergence (full angle,), mrad z 3 z 4
Laser Emission to Sync Out Pulse, ns (at Average Single Pulse Energy s150 at 527 nm at 1 kHz),ns
           Delay
           Jitter

 


e 50
w 2

Laser Trigger to Sync Out Pulse, ns (at Average Single Pulse Energy s 150 at 527 nm at 1 kHz),ns
           Delay
           Jitter

 


300 200
8

Polarization d 100:1, horizontal d 100:1, vertical
Warm-up Time, min w 10

Operation Voltage

          with AC/DC adapter

          without AC/DC adapter

90 - 264 V AC

24 10% V DC

Operating Temperature, s 15 - 35 (w 80% relative humidity, non-condensing)

Dimensions (L x H x W), mm

          Laser Head

          Power Supply

          Power Supply with heat sink

 

215 x 40 x 70

230 x 47 x 148

230 x 117 x 148

Weight, kg:

          Laser Head

          Power Supply

          Power Supply Heat Sink

 

w 1.3

w 1.9

w 1.7

Fiber Cable Length, m 1.5 s5%

Remote Control of Laser Parameters

(Ext./Int. Triggering, ON/OFF, pulse repetition rate, pulse energy)
via RS-232 interface
Data rate via Interface RS-232, bit/s 4800
Laser Class (CDRH) IV
Compliance RoHS, CDRH, CE
Drawing of Laser Head Drawing
Drawing of Power Supply Drawing
Drawing of Fan Heat Sink for PSU Drawing