...Laser-compact Group specializes in research, development and manufacturing of ultra-violet (UV), green and infrared (IR)
diode-pumped solid-state (DPSS) lasers....
ISO 9001:2008 certified

Model DTL-394QT (263, 527 & 1053 nm) - 3-wavelength laser

Application fields:  various types of spectroscopy, laser microscopy, hi-tech R&D, laser-induced fluorescence, light detection, non-contact inspection, photoacoustics, semiconductor processing.

Features:
IR, VIS and deep UV laser light from one source
Simultaneous pulses at 1053 nm, 527 nm and 263 nm in one beam with the same direction
Active Q-switched mode of operation with short pulse duration
Low jitter for critical timing applications
High beam quality, TEMoo
External / internal triggering, PC control via RS-232
OEM version and complete CDRH laser system are available

 

 

 

 

 

 

 

Parameter / Model DTL-394QT
Wavelength, nm 263 527 1053
Mode of Operation Q-switched with AOM, ext./int. triggering/through RS-232
Emission Mode Three wavelengths simultaneously
Pulse Repetition Rate, kHz
   Ext. Triggering
   Int. Triggering

Single shot to 10 kHz
0.01 - 10 kHz

Single shot to 50 kHz
0.01 - 30 kHz

Single shot to 100 kHz
0.01 - 30 kHz
Pulse Energy @ 1 kHz, 10 100 100
Average Output Power, mW 16 @ 4 kHz 350 @ 5 kHz 700 @ upper 50 kHz
Pulse Width, ns
   @ 1 kHz
   @ 5 kHz
   @ 10 kHz
   @ 30 kHz
   @ 50 kHz (typical)
   @ 100 kHz (typical)
 

5
10
12

-
-

-

 

8
14
17
40
60

-


10
17
 25

60

80

170

Peak Power @ 1 kHz, kW 2 15 10
Beam mode TEMoo
Beam Diameter (, at output aperture), mm 1 1 2
Beam Divergence (full angle, ), mrad 1 3 4
Laser Emission to Sync Out Pulse (at Average Single Pulse Energy 8 at 263 nm at 1 kHz), ns
    Delay
    Jitter

 

 

50
2
Laser Trigger to Laser Emission Pulse (at Average Single Pulse Energy 8 at 263 nm at 1 kHz), ns
    Delay
    Jitter

 

 

300200
8
Polarization 100:1, horizontal 50:1, vertical 50:1, vertical
Warm Up Time, min 10
Operating Voltage
   with AC/DC adapter
   without AC/DC adapter

90 - 264 V AC
12 10% V DC
Operating Temperature, 15 - 35 / up to 80% non-condensing
Dimensions, mm
   Laser Head
   Laser Head with Heat Sink
   Power Supply
   Power Supply with Heat Sink

 

311 x 55 x 90
311 x 122 x 90
150 x 43 x 93 (x 115 with key)
150 x 110 x 93 (x 115 with key)

Weight, kg:
   Laser Head
   Laser Head with Heat Sink
   Power Supply
   Power Supply with Heat Sink

 

2,5
1,5
1,0
1,0

Remote Control of Laser Parameters (Ext./Int. Triggering, ON/OFF, pulse repetition rate, pulse energy) via RS-232 interface
Data rate via Interface RS-232, bit/s 4800
Laser Class (CDRH) IV
Compliance RoSH, CDRH, CE
Drawing of laser head Drawing
Drawing of DC power supply Drawing
Drawing of fan heat sink for LH Drawing
Drawing of fan heat sink for PSU Drawing

 

Specifications are subject to change without notice.